giovanni56 Posted February 22, 2021 Report Share Posted February 22, 2021 Ar3a con tweeter ricostruito installato. The foam, unfortunately, is not 5/8". However, in my opinion, they sound very good. Quote Link to comment Share on other sites More sharing options...
lakecat Posted March 2, 2021 Report Share Posted March 2, 2021 Nice! Quote Link to comment Share on other sites More sharing options...
newandold Posted March 2, 2021 Report Share Posted March 2, 2021 Congratulations! Those 3a’s appear to be beautifully restored. I wouldn’t be overly concerned about the roll radius unless you’re noticing an issue with the bass at high volume levels, when the movement really gets going. The main concern I have with woofers as old as these is the compliance of the spiders. Often overlooked, they may appear fine and uncracked. However, if the compliance is significantly down from the original specs then they could more easily bottom out then when new. The smoothest bass comes from the spider and the surround working in unison to maintain control over the voice coil. Bill Quote Link to comment Share on other sites More sharing options...
ar_pro Posted March 2, 2021 Report Share Posted March 2, 2021 Wow. They look like new - congratulations! Quote Link to comment Share on other sites More sharing options...
rjr513 Posted March 2, 2021 Report Share Posted March 2, 2021 They look great ...nice job... i'm curious where you got the domes and suspension material to rebuild the Tweeters? Quote Link to comment Share on other sites More sharing options...
giovanni56 Posted March 2, 2021 Author Report Share Posted March 2, 2021 1 hour ago, rjr513 said: Hanno un bell'aspetto ... bel lavoro ... sono curioso di sapere dove hai preso le cupole e il materiale di sospensione per ricostruire i tweeter? Everything made in Romagna, 😎 Quote Link to comment Share on other sites More sharing options...
giovanni56 Posted March 2, 2021 Author Report Share Posted March 2, 2021 5 hours ago, newandold said: Congratulazioni! Quelle 3a sembrano essere state magnificamente restaurate. Non sarei eccessivamente preoccupato per il raggio di rollio a meno che tu non stia notando un problema con i bassi ad alti livelli di volume, quando il movimento inizia davvero. La preoccupazione principale che ho con i woofer vecchi come questi è la conformità dei ragni. Spesso trascurati, possono sembrare a posto e senza crepe. Tuttavia, se la conformità è notevolmente inferiore rispetto alle specifiche originali, potrebbero più facilmente toccare il fondo rispetto a quando saranno nuove. I bassi più fluidi provengono dallo spider e dal surround che lavorano all'unisono per mantenere il controllo sulla bobina mobile. Conto The spiders are fine; after the refoam, I checked the T&S parameters, all ok. Quote Link to comment Share on other sites More sharing options...
Aadams Posted March 3, 2021 Report Share Posted March 3, 2021 Quote Link to comment Share on other sites More sharing options...
giovanni56 Posted March 3, 2021 Author Report Share Posted March 3, 2021 15 ore fa, Aadams ha detto: In realtà, quel valore non è Fs ma Fc; tutti questi dati sono relativi al woofer installato nell'altoparlante e collegato al filtro crossover. Quindi il Qts è il Qtc, Qes è il Qec e così via. È anche evidente dal titolo, AR3a (European). Quote Link to comment Share on other sites More sharing options...
giovanni56 Posted March 3, 2021 Author Report Share Posted March 3, 2021 15 hours ago, Aadams said: Quote Link to comment Share on other sites More sharing options...
ligs Posted March 4, 2021 Report Share Posted March 4, 2021 "In realtà, quel valore non è Fs ma Fc; tutti questi dati sono relativi al woofer installato nell'altoparlante e collegato al filtro crossover. Quindi il Qts è il Qtc, Qes è il Qec e così via. È anche evidente dal titolo, AR3a (European)." Translation: In reality, that value is not Fs but Fc; all these data refer to the woofer installed in the speaker and connected to the crossover filter. So Qts is Qtc, Qes is Qec and so on. It is also evident from the title, AR3a (European). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.