rrcrain Posted March 7, 2015 Report Share Posted March 7, 2015 One of my old solid states amps is failing (failed) and I suspect, based on the failure mode, it might be dried out electrolytic caps. There's only 7 electrolytics per channel so cost is not a serious concern tho size is.I can find exactly what I need on mouser.com (is there someplace better to go), but the ripple current spec has thrown me. I'm assuming this is important. Al things being equal, should I choose a cap with the highest or lowest ripple current spec? Example on what I'm looking for 220, and 100uf 100V polarized electrolytic 20 and 10 uf NP 10V Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.