ben76 Posted April 14, 2012 Report Share Posted April 14, 2012 Hi everybody,My father recently got hold of a pair of AR2ax with woofers in need of re-foam. The mysterious thing is that although the drivers look original (at least to me) the cones look like they have a flat edge and not an angled one!All the re-foaming kits I have seen for the AR 10" woofers seem to be targeted at angled cone edges, and I was told that AR never made woofers for the AR2ax with a flat edge!Both woofers look identical in all respects: basket, magnet, cone material andshape, and dust cap. The basket looks like stamped steel, and one ofthem has a stamp on the magnet saying "Feb 3 1972". They both haveexactly the same paper cone with a 2-1/4" felt dust cap.Did somebody re-cone both woofers with the wrong cones at some point? (a clue may be a sticker on both woofers reading: "Stuart Elec 1-5-88 UPS" - or maybe URS instead of UPS).I attach pictures with the hope that somebody will be able to shed some light on this mystery.Thanks in advance!BenP.S.I have been reading the posts on this forum for quite a while now, but this is my first post.I am always amazed at the amount of great advice and knowledge on this forum - it is very educational! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.