DavidDru Posted October 14, 2016 Report Share Posted October 14, 2016 I need jumpers between my binding posts as mine have not had any since I got them. What have you guys done and what do the originals look like? I was using bananas with heavy gauge wire between until I sold the speakers those came with. Link to comment Share on other sites More sharing options...
ar_pro Posted October 15, 2016 Report Share Posted October 15, 2016 The original jumpers were just bare, light-gage wire wrapped around the posts, David. For replacements, I used 4 flat, gold-plated spades soldered to each end of 2 short lengths of 12-gage stranded wire. If you measure post-to-post, you'll see exactly the overall length required to fit snugly between them. Link to comment Share on other sites More sharing options...
DavidDru Posted October 15, 2016 Author Report Share Posted October 15, 2016 Was wondering if they were just that. I was thinking along the lines of what you did using the round spades so they stay on. My KLO cabled have spades on the ends and they are large and fairly rigid so it makes dealing with the binding post difficult. If it becomes an issue I will just do the same thing but with banana plugs. The ones I had before worked great. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.