speakone Posted August 22, 2012 Report Share Posted August 22, 2012 I have a pair of AR3a speakers and the Pots' have gone bad I tried to clean them but no Dice.My question is if I use 16 Ohm L-Pads how would I wire them up? as I understand there is a difference.Could some one help me please I don't know if any one has a pitcher if you will on how to go about this.The Serial numbers are 61305 & 62280 I actulay took the pots apart and put them back together it helped a little but not totaly.Thanks in advance if some one can help. John. Link to comment Share on other sites More sharing options...
JKent Posted August 22, 2012 Report Share Posted August 22, 2012 Hi John and welcomeFirst--Be SURE to read the AR3a Restoration booklet: http://www.classicspeakerpages.net/library/acoustic_research/original_models_1954-1974/original_models_schematicss/restoring_the_ar-3a/Use these 8 ohm 15 watt L-pads: http://www.parts-express.com/pe/showdetl.cfm?Partnumber=260-248See Post #28 and 29 here for how to wire them: http://www.classicspeakerpages.net/IP.Board/index.php?showtopic=7358&st=20Good luckKent Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.