wash89 Posted March 14, 2012 Report Share Posted March 14, 2012 AR - "a" metal speaker logosand also the metal "3s" found on the orginal AR 3s. Both types attach like stick-pins.any help will be welcomethanks much wash Link to comment Share on other sites More sharing options...
Robert_S Posted March 14, 2012 Report Share Posted March 14, 2012 There's a pair of "a"s for sale here (no affiliation with seller):http://www.ebay.com/...#ht_1468wt_1081Note: There's a section of the site specifically for "For sale / Wanted" posts. Link to comment Share on other sites More sharing options...
wash89 Posted March 14, 2012 Author Report Share Posted March 14, 2012 Robert, Thanks for the information and your reminder to scroll down to the botton of the page. Sorry I ran the ad in the wrong section.wash Link to comment Share on other sites More sharing options...
JKent Posted March 15, 2012 Report Share Posted March 15, 2012 There were a couple of members who had planned to make repro 3's but so far no one has.Think I have one "a". You can PM me if you want to discuss.Kent Link to comment Share on other sites More sharing options...
wash89 Posted March 16, 2012 Author Report Share Posted March 16, 2012 Thanks Kent, I appreciate the information. I have picked up the "a" set noted above and will be looking for the "3" set. Some of this material must have been lost from the speakers over the years.Be well,ch Link to comment Share on other sites More sharing options...
JKent Posted March 16, 2012 Report Share Posted March 16, 2012 fwiw, I have been told the AR3a never had an "a" pin--that was only used on the 2a.I'd really be interested to know if anyone ever made the repro "3"s. Gary said he could do it but was not sure of the font. I suggested that any member with a "3" pin send it to Gary but apparently nothing ever came of it. Another member (forget who) said he could make them but was concerned about copyright infringement. I really doubt that making repro labels for use by hobbyists and restorers, of a half-century old item from a defunct company presents any legal issues (but I'm not a lawyer).Kent Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.