Jump to content

Owner of AR 90s looking for list of caps....


Recommended Posts

I recently acquired a pair of AR 90s, i have replaced the surrounds already but i can tell they are in need of a recap, but for the life of me i can not find the specs listing what specific cap values any help would be appreciated,

note - i did find the schematic in the library but i cant read it or figure out how to copy it or inlarge it so i can read it, any help would be appreciated.

thanks Chris

Link to comment
Share on other sites

Ctrl + will allow you to enlarge the image


right click the image, select "Save Image As" and copy to your hard drive. Then you can enlarge, enhance, adjust contrast etc.

Or just read the values off the caps that are in there


Link to comment
Share on other sites

This is the list of the values of the originals:

4, 6, 8, 24, 30, 40, 80, 350

You aren't going to get exact matches for all of them, so this is what I ended up for mine:

PulseX for 8.2, 6.2 and 3.9.

Solens for 25, 30, 40 and 80.

Electrolytic combination of 100 and 250 for the 350.

I've recaped both an AR90 and a AR9. I did the AR90's with the crossovers in place. It was a tight reach, but if you are patient, it can be done. The AR9 was a lot easier because the woofer hole is so much bigger.

Good luck


Link to comment
Share on other sites

  • 4 weeks later...


This topic is now archived and is closed to further replies.

  • Create New...