Shacky Posted August 7, 2011 Report Share Posted August 7, 2011 Just pisked these up from local CL. Very well kept with original boxes.http://s137.photobucket.com/albums/q227/shacky1973/Cizek%20Model%20One/ Link to comment Share on other sites More sharing options...
Shacky Posted August 14, 2011 Author Report Share Posted August 14, 2011 Got a woofer out. Lots of fiberglass stuffing - and no screens on woofer. I'll weigh the damping for reference.Also my first look at crossover. Looks like same cheap caps KLH used. Want to get this board out so I can recap.Also more pics added to link in first post. Link to comment Share on other sites More sharing options...
Shacky Posted September 9, 2011 Author Report Share Posted September 9, 2011 Got the crossover out. Pots look tight. Not sure I see any openings for Deoxit'ing. Link to comment Share on other sites More sharing options...
Shacky Posted September 12, 2011 Author Report Share Posted September 12, 2011 Wondering if it's going to be better to clean or replace these pots. Anybody have experience replacing with new? See these are available:http://www.opamp-electronics.com/catalog/ohm-linear-taper-potentiometerpot-shaft-p-1002.html Link to comment Share on other sites More sharing options...
Tubeboob Posted January 29, 2013 Report Share Posted January 29, 2013 So now that the work is done, are they ready for audition and a report to us all?How about some pics of the completed work?Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.