ReliaBill Engineer Posted November 2, 2023 Author Report Share Posted November 2, 2023 I’ll be rebuilding these early AR/3a dome midranges. Open circuits, per the seller. Once complete, I’ll use them to compare sound to the 2” hard dome midranges above. Quote Link to comment Share on other sites More sharing options...
Aadams Posted December 4, 2023 Report Share Posted December 4, 2023 On 11/1/2023 at 10:33 PM, ReliaBill Engineer said: I’ll be rebuilding these early AR/3a dome midranges. Open circuits, per the seller. Once complete, I’ll use them to compare sound to the 2” hard dome midranges above. Do you have them in working order? Quote Link to comment Share on other sites More sharing options...
ReliaBill Engineer Posted December 16, 2023 Author Report Share Posted December 16, 2023 On 12/4/2023 at 12:38 PM, Aadams said: Do you have them in working order? Alas, no. Neither mid has the dome+VC. I wound up getting a “forced” refund from the seller. I asked him prior to purchase what the DCR was of each. He said “open circuit”. But he failed to say that neither one has any wires to measure from! eBay agreed with me, that the seller was deceptive in his description and communications with the buyer (me). Since then I have the raw domes, but need the VCs. I may wind up having to make my own VC formers, and winding them myself. I have kapton. I have various spools of wire, 24-36 AWG. But not sure I want to go that route. Quote Link to comment Share on other sites More sharing options...
ReliaBill Engineer Posted December 16, 2023 Author Report Share Posted December 16, 2023 One of the mids, after arrival: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.