Johnnyj Posted July 15, 2022 Report Share Posted July 15, 2022 while I was pulling thespeakers out to reform them. I didn't mark my +-s I think I may have one maybe 2 crossed any help would be great thanks Quote Link to comment Share on other sites More sharing options...
DavidR Posted July 15, 2022 Report Share Posted July 15, 2022 Are talking about the wires or the connections on the drivers? AR wiring should be that the darker color (e.g. blue) is neg and the lighter color (e.g. yellow)is pos (the example is for the tweeter wiring but the logic follows thru for each driver). If you mean the drivers then there should be a sticker with the driver p/n applied near the spade connections with a red dot. The positive spade is closest to the red dot. Quote Link to comment Share on other sites More sharing options...
Johnnyj Posted July 15, 2022 Author Report Share Posted July 15, 2022 Thank you Quote Link to comment Share on other sites More sharing options...
AR55 Posted July 15, 2022 Report Share Posted July 15, 2022 Attached is the crossover schematic for the TSW810, which should give you what you need to confirm that you have everything correctly hooked-upped. AR-Drawing445 - 102118 - Crossover Schematic - AR810TSW - 1987.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.