Carlspeak Posted August 3, 2012 Report Share Posted August 3, 2012 Below are two pictures of an LST crossover. I'm puzzled by the presence of an 80 uF cap (bright silver) and an extra Chicago Industrial paper/wax cap marked with 4 and 6 uF caps like those found in AR2ax's.I have never seen a crossover with the obove mentioned parts. Can anybody explain what model/release this is and what the purpose is of the extra 4 and 6 uF caps?lst quest.zip Link to comment Share on other sites More sharing options...
Carlspeak Posted August 3, 2012 Author Report Share Posted August 3, 2012 I can't edit my 1st post to replace the zip file with real pics. So, I've added this post to show them. Link to comment Share on other sites More sharing options...
xmas111 Posted August 3, 2012 Report Share Posted August 3, 2012 Hi Carl, Are you sure it isn't a 30µf cap? Here's a picture of one of mine when I was rebuilding them, It was a 30µf with the 4µf & 6µf to make the 40µF cap. John Link to comment Share on other sites More sharing options...
Joe Rutledge Posted August 3, 2012 Report Share Posted August 3, 2012 I second John's comment of the 30uf cap, this looks like the same config as my LST;s - I think the 6 + 4 was added to the 30 uf to get 40. of course I could be all wet.Joe Link to comment Share on other sites More sharing options...
Carlspeak Posted August 4, 2012 Author Report Share Posted August 4, 2012 That's it. That has to be it. 30+10. Why didn't I think of that? AR must have not been able to get 40 uF caps at one point in time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.