Rubber Duck Posted April 9, 2011 Report Share Posted April 9, 2011 It looks like the caps to be replaced for the AR11 are 10 MFD, 40 MFD and 122 MFD (50 and 72). How close to these values must I get? for example will a 120mfd replace the 122 MFD or can a 39 MFD replace the 40 MFD? Finding caps with these exact values seems to be difficult. Imm looking at the Solen 400v PB series.Thanks Link to comment Share on other sites More sharing options...
Carlspeak Posted April 9, 2011 Report Share Posted April 9, 2011 If the replacement caps are within 5% of the original's nominal values you'll be fine. Most original parts were plus minus 10% anyway. Link to comment Share on other sites More sharing options...
michiganpat Posted April 11, 2011 Report Share Posted April 11, 2011 and I wouldn't bother with film caps for anything over ~20uF....you won't hear a difference, and it will be A LOT less expensive. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.