Carlspeak Posted September 19, 2008 Report Share Posted September 19, 2008 Attached is a blog document account of a recent Model A woofer recone job. The woofer was made by RCF, an Italian mfg. (Model L12P48).The challenge was to salvage the original cone, install a new surround, VC and spider and properly position and align the VC without shimming it.The document speaks for itself.Snell_Model_A_recone_blog.pdf Quote Link to comment Share on other sites More sharing options...
Carlspeak Posted October 7, 2008 Author Report Share Posted October 7, 2008 My first post was focused on how the job was done. This post made to simply report the customer re-installed the reconed woofer and reported yesterday he was extremely satisfied with the results. Quote Link to comment Share on other sites More sharing options...
Mistisal Posted April 11, 2018 Report Share Posted April 11, 2018 THANKKKKKKKKSSSSSSS!!!!! I'm screaming in joy!!!! where are you now Carlspeak? do you still repair Snell's???? thx! Quote Link to comment Share on other sites More sharing options...
Pete B Posted April 13, 2018 Report Share Posted April 13, 2018 Carl has passed may he RIP. You have a woofer needing a recone? Quote Link to comment Share on other sites More sharing options...
Lynx0849 Posted January 9, 2021 Report Share Posted January 9, 2021 I know this thread is old but several years ago but I thought I might be able to help someone else. I had a woofer rebuilt saving the frame & cone by Gabriel Sound in Pompton Lakes NJ. They were the RCF distributor at the time. They replaced the spider and the surround. The spider was sagging and the surround foam had torn. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.