Guest EvanG Posted February 28, 2006 Report Share Posted February 28, 2006 Are these the correct replacement surrounds for the smaller advents? Thankshttp://www.partsexpress.com/pe/showdetl.cf...tnumber=260-950 Link to comment Share on other sites More sharing options...
Doug G. Posted February 28, 2006 Report Share Posted February 28, 2006 Evan, that appears to be the correct one because their other Advent kits specify the one for the steel frame (used in the New Advent speaker) and the 12" would be for the original woofer with the masonite (fiber) ring (used in the original Advent Loudspeaker).Doug Link to comment Share on other sites More sharing options...
Guest EvanG Posted February 28, 2006 Report Share Posted February 28, 2006 Thanks Link to comment Share on other sites More sharing options...
Guest EvanG Posted February 28, 2006 Report Share Posted February 28, 2006 Also where can I get a similar kit for the Advent/3's? Link to comment Share on other sites More sharing options...
Doug G. Posted February 28, 2006 Report Share Posted February 28, 2006 I don't know of any specific kit for the Advent/3s. I would just measure the outside and inside diameters of the existing surrounds and find one with those dimensions. Should work OK.Doug Link to comment Share on other sites More sharing options...
Guest EvanG Posted March 7, 2006 Report Share Posted March 7, 2006 How do I glue the new foam to the woofer, is there a special way? Link to comment Share on other sites More sharing options...
Guest EvanG Posted March 7, 2006 Report Share Posted March 7, 2006 I glued it under the woofer, the way it was originally (I think). It's drying right now Link to comment Share on other sites More sharing options...
Doug G. Posted March 7, 2006 Report Share Posted March 7, 2006 Hi Evan,Sorry I wasn't able to get back to you. I was going to say that you should try to determine how the surround was attached originally. You can usually do this by observing where the remaining adhesive is. It sounds like you were able to do this.I hope they work well.Doug Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.