Guest gioip Posted February 9, 2006 Report Share Posted February 9, 2006 The point yellow and red close the speaker in the picture are the red polarity of drives ?I have to conect the middle pole of the pot to the red pole of tweeter?Thanks Link to comment Share on other sites More sharing options...
RoyC Posted February 9, 2006 Report Share Posted February 9, 2006 The (+) yellow dot side of the tweeter connects to the center("B") level control tab.The other (-) side of the tweeter (connected to the green wire) is sometimes marked with a red "x". It is connected to the #2 level control tab; the signal originating from the "2"/postive cabinet input.The tweeter and woofer are wired out of phase.Roy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.