no1herenow Posted March 21, 2017 Report Share Posted March 21, 2017 This layout plans were created by Bell Laboratories circa 1945 by reverse-engineering an early Khorn... The plans are accurate, as I built four of them. Just have a really good radial arm saw (like an early DeWalt, and a really good carbide blade. Dimensions are critical, as errors compound). Also, cutting the wood is the most time-consuming part of the project, so if you are going to cut one, you might as well cut ten, as saw setup time is enormous. Plan on 1/32" accuracy, and less than 2 degrees error. I used Novaply, which is denser than water, so these things are beasts. Also used the professional JBL drivers (the midrange driver weighed 26 lbs ;-0 ) I have better plans that are more legible, as well as the Speakerlab plans. Anyway, Enjoy! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.