mtb_ww Posted April 12, 2011 Report Share Posted April 12, 2011 Due to my room configuration, I need to my A series speakers off the floor 5 to 8 inches to cancel out unwanted bass. Since the A series floor standers are tall, but not very deep, I am having trouble finding appropriate stands. Any suggestions are appreciated! Also, a DIY stand is an option too, if I can find suitable plans. Thanks in advance. Link to comment Share on other sites More sharing options...
dynaco_dan Posted April 13, 2011 Report Share Posted April 13, 2011 Due to my room configuration, I need to my A series speakers off the floor 5 to 8 inches to cancel out unwanted bass. Since the A series floor standers are tall, but not very deep, I am having trouble finding appropriate stands. Any suggestions are appreciated! Also, a DIY stand is an option too, if I can find suitable plans. Thanks in advance.Hi thereSome folks use bricks or cement tiles.Always add something to eliminate them from slipping.I have original AR speaker bases that I did use, temporarily, many years ago.They have 2" x 2" vertical uprights at each speaker corner.A set of round felt protectors was supplied for attaching to the tops of those uprights to lessen the speakers being scratched.The vertical strength of the 2 x 2's is probably, tons per square inch.Someone or something bumping them even just slightly and over the speakers can go.Also there is not much lateral strength to their cross members. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.