Guest Posted December 25, 2001 Report Share Posted December 25, 2001 is there a way i can get the tweeters at a higher level, the l pads are ok, is there a resistor conected to the hf driver thanks for your help john Link to comment Share on other sites More sharing options...
Guest Posted December 31, 2001 Report Share Posted December 31, 2001 If the tweeters don't have enough bite for your taste, and you don't want to replace them, you might put an aural exiter in the circuit. Used Aphex machines are readily available on eBay for a little over $100. Link to comment Share on other sites More sharing options...
Guest Posted January 2, 2002 Report Share Posted January 2, 2002 There is no resistor attached to the tweeter circuit other than that offered by the L-pad. If the pad is in good working order, and set wide open, you will get no more out of these tweeters. The crossover doesn't offer much protection and consequently the tweeters are easy to fry if pushed too hard or if the L-pad is removed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.