Guest Robert M Posted December 8, 2006 Report Share Posted December 8, 2006 I salvaged some inductors from the AR-2 (10" woofer, dual 4" midrange in the plastic cups) and would like to know their value in case I can use them on a project. THANKS. Link to comment Share on other sites More sharing options...
onplane Posted December 9, 2006 Report Share Posted December 9, 2006 Robert,There is a table in this thread near the bottom of the 1st page that lists all of the AR inductors:http://www.classicspeakerpages.net/dc/dcbo...e=&topic_page=1Hope this helps ...Regards,Jerry Link to comment Share on other sites More sharing options...
Guest Robert M Posted December 9, 2006 Report Share Posted December 9, 2006 Thanks Jerry, nice resource there. Unfortunately, the AR-2 is not listed and the bobbin does not have any markings on it other than the inductor symbol scratched into it by hand. I guess I'm going to have to procure a meter with that feature at some point. Link to comment Share on other sites More sharing options...
dynaco_dan Posted December 10, 2006 Report Share Posted December 10, 2006 Hi there;I've been working occasionaly at re-doing the AR and KLH Chronological list's.I've been adding slow and a few fast blow fuses for the speakers that I have data on.I now see that I should also note the various coil numbers, thank you. Link to comment Share on other sites More sharing options...
dynaco_dan Posted December 10, 2006 Report Share Posted December 10, 2006 Hi there;With the limited number of speaker models during that early period I guess they had no need to mark values to not mix them up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.