[KLH Model Fives Recapped]

Hi Kent,

I’m done recapping one of the speakers, so far the sound output is far from before.

I would also seal the woofer cloth surrounds after. Does the mid range speakers need to be sealed too? If so, any suggestions?

 Thanks

[KLH Model Fives Recapped]

Thanks Kent! 

[KLH Model Fives Recapped]

Thanks Kent.

The wires from the 2 joint ends of 4uF caps goes to where the original black wire is as common point. 

[KLH Model Fives Recapped]

Kent,

Can I use these resistors for the 10 ohms and 6 ohms?

Also, I’ll get Dayton caps, is it fine to get the 15uf instead of 16uf?

 Thanks.

[KLH Model Fives Recapped]

Got it! Thanks so much Kent, I appreciate your help! Let you know if I have other questions.

[KLH Model Fives Recapped]

Here’s the photo of the 2x4 MFD

 

[KLH Model Fives Recapped]

Thanks for the response Kent! 
The 2x4 MFD will be replaced by 2 of the 4uF, correct? The original 2x4 has 3 wires, how do I connect the 2 units of 4uF replacement caps?

Do I really need to replace the resistors too? Thanks 

see attached photos

[KLH Model Fives Recapped]

Hi, can you list the caps needed to replace at Model 5? Also, can you share a diagram?

 Thanks so much!