Arch420

Hi Kent, I’m done recapping one of the speakers, so far the sound output is far from before. I would also seal the woofer cloth surrounds after. Does the mid range speakers need to be sealed too? If so, any suggestions? Thanks

Thanks Kent!

Thanks Kent. The wires from the 2 joint ends of 4uF caps goes to where the original black wire is as common point.

Kent, Can I use these resistors for the 10 ohms and 6 ohms? Also, I’ll get Dayton caps, is it fine to get the 15uf instead of 16uf? Thanks.

Got it! Thanks so much Kent, I appreciate your help! Let you know if I have other questions.

Here’s the photo of the 2x4 MFD

Thanks for the response Kent! The 2x4 MFD will be replaced by 2 of the 4uF, correct? The original 2x4 has 3 wires, how do I connect the 2 units of 4uF replacement caps? Do I really need to replace the resistors too? Thanks see attached photos

Hi, can you list the caps needed to replace at Model 5? Also, can you share a diagram? Thanks so much!