BernieH

Hi recapping some Model 5s right now. Thank you for all of the great guidance. After ordering all the caps (Dayton) discussed here and confirmed with the schematic, I find a slightly different configuration on my model 5 crossovers. I checked both boards and although I did not find a date stamp they are the older /aluminum plate version. So, I have /had the 2x 4Uf cap but then 2 3Uf caps, I was expecting the 2 x4 Uf, 1-3Uf, and an additional 4Uf. Since I had purchased 3-4Uf(s) a 1-3Uf I recapped the first one in line with info here as well as the schematic. Now I am wondering if I should have capped it as it was ( 2-3Uf(s) not 1. Can this be counted merely as a 4Uf supply problem at the time or should I replace the caps as they are/were? The rest of the board looks the same as other pics and I don’t imagine they would have changed this in mid production would they? Appreciate any comments- thanks, b