Darren James
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Darren James
-
-
On 11/4/2019 at 4:23 PM, teknofossil said:
Hello all. I just completed replacing some surrounds that were incorrect types installed by a previous owner (5/8" roll, over sized surround used, by cutting out a section). My question is about the replaced dust cap(s). These are of the felted (porous) type that allows air passage. Since the AR voice coil formers are the vented type, should the the dust caps be sealed? It has been my experience they should. Thoughts?
-Tom
I think you're OK with felt... some places only have certain sizes. So screen or felt works OK....
-
-
existing caps state....
100 uf / this cap gave a reading of nil. 00.00
40 uf / 52.45uf
24uf / 32.33uf
8uf / 9.12uf
4uf / 7.67uf
so this is where one speaker is at..... not for long...
-
-
-
8 minutes ago, Stimpy said:
Hey Darren,
We don't mean to be confusing. We're just enthusiastic. But, remember, whether you choose film or NPE, or a mix, they'll be an upgrade. Don't stress too much over it, as there is no wrong choice.
As to your questions, yes the parallel shunt caps are "second level". NPE is fine. The 4.0 and 24uF caps are the series caps. To me, they deserve "top notch". Though, as mentioned, electrolytic is fine too. But, even inexpensive poly's are great. And they won't ever need to be replaced.
Good luck.
P.S. I literally read and researched for months, when deciding on caps for my AR-90s. So, you're not alone.
Passionate...... we'll call it passionate..... I get it!!
I did the caps on a pair of JBL CF150's and it was like new speakers... I have done early B and W and seen no difference, I've done some Marantz Imperial 6's and huge change...
I swear it is all hit and miss as far as a change.... But it does help to do the best you can... then you can go onto other shit as the reasons for shitty sound.... LOL
thanks,
Darren
-
good mix from all of you..... thanks for the thoughts....
I will take it all into account, then choose so I only have myself to blame if it shits.... LOL
So, on the parallel ones (shunts?) these are second level action right? So the series ones should be as clean and top notch as best possible...
Darren
-
awesome guys!! thank you!
-
Money money money.......
so best budget purchase is.... still $140 for both
2 of 2' uf Dayton for the 4
2 of 12uf Dayton for 24
1 Dayton 7.5uf and 1 Dayton .48 uf for the 8
1 Dayton 40uf for 40
and 1 Audyn 100 uf for 100
That was the most I wanted to spend... close to $400 investment so far...
woofers were $170 for the pair.... 200003 very nice surrounds all done by seller
-
Thanks Stimp,
They are "elcap" black with red ends... the 100 is a blue metal cap "elcap"
Darren
-
Found an orphan pair for cheap money.
As usual the owner replaced the woofers with some aftermarket JL audio woofers.
At least they got the Ohm correct. I found a pair of correct woofers.
Question, would you replace the caps on principal?
What an ugly crossover! LOL
Darren
WTB: AR 91 grill badge
in For sale / Wanted
Posted
Hello, I need one screen badge for my 91's....
DM me
Thanks in advance
Darren