roundhome
-
Posts
310 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by roundhome
-
-
>Thanks Roundsound.
>What was the list of woofers at the bottom of your post all
>about? Were they supposed to be links to other specs or were
>all those the same as the 1210130-1?
>
>Remember, it's all about the music
>
>Carl
>Carl's Custom Loudspeakers
Those are other woofers I have specs for just can"t type for vary long
Jim
-
>>Would anyone here have the T/S specs on the AR 9
>woofers?
>>Also what is the net cab volume of the AR 9.
>>
>>Thanks DC
>
>I'd like to expand that question a bit further - "Would
>anyone here have the T/S specs on ANY AR woofer?"
>
>
>Remember, it's all about the music
>
>Carl
>Carl's Custom Loudspeakers
AR uper mid 1200044
30oz mag
100 watts rms
4 ohm
1,200-9,000
spl 88 db 1w/1m
fs604
4 1/2 lb
A5 3/4 b 4 3/4 c 1 3/4 d 4 11/2 e 1 3/16
Ar 1210010-1 mid dome
100 watt rms
4 ohm
1,00-10,000hz
mag 30 oz
spl 89db 1w/1m
fs485
4lb
a5 3/4 b4 3/4 c 2 d4 11/16 e 1
woofer 1210130-1
30 watts rms
6 ohm
30-7000 hz
mag 8 1/2 oz
spl 84db 1w/1m
vas 1.13 c ft
qms 2.16 qes.53 qts.43 fs 30.5hz
2-1/2lb
a 6-9/16 b5-9/16 c3 d 2-3/4 3 1
more
specs on the following woofers
1210091-1
1210057-0
1210133-3
1210163-5
1210125-1
1210131-2
1210132-1
1210120-1
1210131-1
1210156-3
1210074-2
-
HES NOT KIDDING A PAIR JUST SOLD FOR $1625.00 ON EBAY
JIM:-):7
AR98ls
in Acoustic Research
Posted
Hello They made three types of these first had black plastic on the front with the crossover specs printed on them next were yours wood front the next ones were the 98lsi improved crossover.
the switch is for if they are on the floor our up on a book shelve thats all
last as far as that small dent in the mid leave it alone you will do more harm its not that big. but if you have to I would take a small needle used to give shots pull back the plunger to fill it with air and carefully give it a shot as it fills with air it should pop out. if you don't want to do that carefully work your fingers around the dent from four sides going around it this sometimes works on new dents but older ones just pop back because of the vacume on them. this is a vary expensive driver to play with and not a easy one to find you are best to leave it alone
I would read up on here to learn about the crossover caps and just set them on stands a listen to them. have fun these are vary good speakers.