Grumpyuncleglenn
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Grumpyuncleglenn
-
-
Still here (just).
Thank you your comments. I took the speakers to Haycross Audio in the depths of the Devon countryside in the UK. He worked his magic and produced two videos for Youtube.
-
I've owned my Jii's for three years now having bought them on ebay. The mid range is sounding a bit muddy so I thought I'd open them up and possibly replace the caps on the crossover. When I took the woofer out I found, to my surprise, the barest minimum of a crossover. The woofers are directly wired to the input terminals and there is just one capacitor on the tweeter circuit. No other components at all. I also discovered there was no wadding at all, just the inside of a bare box. I would like, if possible, to re-instate the crossover to as near the original as possible. Does anyone have a schematic I could follow please?
Thank you in advance
Glenn
Snell Jii crossover
in Snell
Posted
Kent
Thank you for your link, which I read through with interest.
Yes, I can thoroughly recommend Haycross Audio in the UK. Cost was very reasonable too. Seeing photos of the original crossovers out of the factory they look a bit of a mess as far as their physical layout goes, but did the job well, presumably. I doubt I'll ever part with my Jii's although I have a pair of standmount Proac Db1's in the system at the moment. I change speakers according to what amplifier I'm using.