Thanks for the quick reply and the bit of searching Bret!
I see Newark also sells a 1.5 Ohm @ 25 watts. I'm reasonably sure I should be able to find a 2.5 also within the range you have specified. Should I be concerned about a particular type of resistor? I see "film", "sand", "ceramic", "wire wound", etc. If they all the have the values I'm looking for how do I decide between the "types"?
Thanks again,
Jon
I realize this is an old post. All I could easily find were the 1.5 and 1 ohm 25 watt wirewound resistors so I used them in series for my 2.5 ohm resistor, I hope that I did not do anything wrong considering how sensitive crossovers can be. Feel free to correct me if I did a no-no!
AR9LS "i" crossover upgrade?
in Acoustic Research
Posted
I realize this is an old post. All I could easily find were the 1.5 and 1 ohm 25 watt wirewound resistors so I used them in series for my 2.5 ohm resistor, I hope that I did not do anything wrong considering how sensitive crossovers can be. Feel free to correct me if I did a no-no!