Posted 27 January 2011 on the CSP For Sale forum:
"AR-3 Dark wood cabs are not torn up at all, but a square planter was placed atop one, and the veneer is starting to split. Woofs need a refoam, one of the mids seems to work, and maybe one of the tweeters. I'm half-deaf so it's tough to tell. Grilles are "cane" type material, and I didn't try to remove them when they put up a lot of resistance to being removed. Screw-in type AR badges are there. $75"
http://www.classicsp...?showtopic=6
Thanks. I basically hammered all the bashed fibers back into place, then mixed up some epoxy and Mixol #22--a trick John O'Hanlon turned me on to, and described in my KLH Model Eight restoration guide in the CSP Library:
http://www.classicsp...h-model-eig.pdf
Another way to do it is to mix fine sawdust, from your sander's dust bag, with the epoxy. To tell the truth, I forget whether I used the Mixol or sawdust on the corner. Here's a photo of a small corner ding on one of the 3s filled