GD70 Posted February 21, 2016 Report Share Posted February 21, 2016 Just finished restoring a pair, did a test listen this morning and one woofer buzzes. Pushing on the cone is smooth, no VC rub. Thanks in advance gents. Glenn Link to comment Share on other sites More sharing options...
stupidhead Posted February 21, 2016 Report Share Posted February 21, 2016 Bummer Glenn. Maybe someone can bring one to Clinton next weekend! Link to comment Share on other sites More sharing options...
GD70 Posted February 21, 2016 Author Report Share Posted February 21, 2016 Bummer indeed! That's what I was thinking, hoping. I'll have to look up which models shared this same woofer. Thanks Geoff! Glenn Link to comment Share on other sites More sharing options...
GD70 Posted February 22, 2016 Author Report Share Posted February 22, 2016 Grabbed a pair on the bay for 48, 48b, and 12's. Still looking for a correct woofer, but these will allow me to listen to them. Link to comment Share on other sites More sharing options...
briodo Posted February 22, 2016 Report Share Posted February 22, 2016 I had a torn cone on an AR90 woofer and found out from forum the AR 10" are pretty much the same across all the product line, other than trim and finish options. I would not be surprised if the ebay one you receive works well enough to be the permanent replacement. Link to comment Share on other sites More sharing options...
GD70 Posted February 22, 2016 Author Report Share Posted February 22, 2016 Thanks briodo! That's what I figured after reading through several AR 12 threads. I'm a stickler for originality, and will try redoing the refoam, just to make sure the VC is perfectly centered, and if the buzzing persists, then I'll be on the lookout for another original. Cheers, Glenn Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.