oldguide Posted September 2, 2015 Report Share Posted September 2, 2015 I finally had to bite the bullet and replace my AR3 pots which were too far gone. Thanks again to all who put the guide together. It was much help. In the process of doing this, I again faced the task of stuffing the speakers with insulation. Instead of the standard fiberglass, I used some newer insulation made of recycled blue jeans which I had left over from a home remodeling project. It is non-scratchy, non toxic. However, it is also slightly heavier than fiberglass per square foot. This left a choice of replacing the old stuffing by volume or by weight. The solution ended up being splitting the difference, i.e. slightly less volume, slightly more weight. I will leave it to the experts to weight in on whether that was the right solution. My tired old ears do not notice the difference. Perhaps there is a placebo effect operating? Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.