Jump to content

AR1 differences early and later models


Recommended Posts

How do you measure them and what's normal range?

You will need a meter that measures capacitance (see link below), and a schematic (I don't have one to post). The caps also have the values printed on them. Add up the values printed on each cap of the bundled ones to get the total capacitance. To be honest, I would not use an AR-1 as my first project...and, as I mentioned above, the oil filled caps are probably fine.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...