Jump to content

Model 1 woofer measurements


Recommended Posts

Boston Acoustics type (fillited) foams were used.

Values below are avg. of two separate woofer tests following fresh refoam with no breakin.

Fs=16.8 hz

Qts=.025

Le=0.78 mH

Vas=7.5 Cu. Ft

Mms=70 grams

Sens.=87 dB

BL=9.25

Although smaller in size (frame OD 10") the properties above resemble those of the AR3 series 11" woofer. The Cizek woofer even had a foam ring around the cone's surface about 2 inches up from the dust cap.

Link to post
Share on other sites
  • 9 years later...
On 29/8/2011 at 21:59, Carlspeak said:

Sono state utilizzate schiume tipo Boston Acoustics (riempite).

I valori seguenti sono medi. di due test separati del woofer a seguito di una nuova schiuma senza rotture.

Fs = 16,8 Hz

Qts = 0,025

Le = 0,78 mH

Vas = 7,5 Cu. Ft

Mms = 70 grammi

Sens. = 87 dB

BL = 9,25

Sebbene di dimensioni inferiori (diametro esterno del telaio 10 "), le proprietà sopra ricordano quelle del woofer da 11" della serie AR3. Il woofer Cizek aveva persino un anello di schiuma attorno alla superficie del cono a circa 2 pollici dal tappo antipolvere.

Qts 0,025 ????

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...