mike tarelli Posted November 4, 2010 Report Share Posted November 4, 2010 Help please! Can anyone tell me if the connectors on the rear-wired AR-6 tweeters are held with a rivet? One of mine has dropped out of the backplate scattering the insulator spacers. I soldered it back together and it works fine but I can't imagine it's very strong . Also it is a little loose. Thanks.Mike. Link to comment Share on other sites More sharing options...
KlausDK Posted November 6, 2010 Report Share Posted November 6, 2010 Help please! Can anyone tell me if the connectors on the rear-wired AR-6 tweeters are held with a rivet? One of mine has dropped out of the backplate scattering the insulator spacers. I soldered it back together and it works fine but I can't imagine it's very strong . Also it is a little loose. Thanks.Mike.Hi MikeYes, it is riveted, and the rivet is held electrically isolated from the chassis with fiber dish and tube.BRgds Klaus Link to comment Share on other sites More sharing options...
mike tarelli Posted November 6, 2010 Author Report Share Posted November 6, 2010 Hi MikeYes, it is riveted, and the rivet is held electrically isolated from the chassis with fiber dish and tube.BRgds KlausHi Klaus,That's what I needed to know. I will re-rivet it.Many thanks,Mike. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.