Guest Jim F Posted February 19, 2009 Report Share Posted February 19, 2009 Hi. My name is Jim and I am a Dahlquiholic. I bought my pair when they first came out very long time ago and I absolutely love the sound of them. I have replaced the woofers with a 12" replacement which sounds wonderful (same voice coil alignmnet). I have the DQ LP1 and two Dahlquist subs running two Carver 250 watt per side amps. Since I got the carvers the deficiencies in the old crossovers are now glaring and it is time to tune them up. I bought all new caps and resistors from Solen but as I start to rebuild them I notice there is a difference from the schematic I got online to what is actually in the board. Specifically the large cap that is supposed to be an 80 uf is actually a 70 uf. So I am wondering if there are more than one crossover designs for the DQ10. Does anyone have schematics out there they wouldn't mind sharing? And for that matter I would love a schematic of the LP1 as well.Thanks very much. Link to comment Share on other sites More sharing options...
Pete B Posted October 27, 2017 Report Share Posted October 27, 2017 Well this is an old thread! Look at all those NPE caps! That later version has just one. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.