Guest Posted October 1, 2002 Report Share Posted October 1, 2002 I'm replacing the level controls on a pair of 3a's. The original ceramic pots had a pin in the center, then looking at them from the rear, two pins are on the left side. The upper pin has one wire and the lower pin has two soldered to it. Which is ground? My next question would be, how are the remaining connections labled (the pin with a single wire and the pin with the double wire. The new control has ground, audio in and audio out. Which goes to which. Thanks for any help for a novice restorer. Link to comment Share on other sites More sharing options...
Guest dogmeninreno Posted October 2, 2002 Report Share Posted October 2, 2002 Don, Go to the AR site on this forum and they have a schematic for the AR3a xovers. Dale in Reno, Nv..... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.