Analogman Posted August 19, 2008 Report Share Posted August 19, 2008 Steer me to one or provide if you please would. Guess I should say Model "20" speaker, crossover schematic.Thank you very much,Craig Link to comment Share on other sites More sharing options...
JKent Posted August 20, 2008 Report Share Posted August 20, 2008 Hi CraigSorry I don't have the schematic, but the 20 uses two 7.5 ohm resistors, oone 3 ohm, two 2uF caps and one 8uF. Maybe some other member has (or can draw) the schematicKent Link to comment Share on other sites More sharing options...
Analogman Posted August 20, 2008 Author Report Share Posted August 20, 2008 Hi CraigSorry I don't have the schematic, but the 20 uses two 7.5 ohm resistors, oone 3 ohm, two 2uF caps and one 8uF. Maybe some other member has (or can draw) the schematicKentHi Kent, I found a schematic for the Model "6" over at "AK". Should be the same, but without the inductor. Thanks, Craig Link to comment Share on other sites More sharing options...
JKent Posted August 20, 2008 Report Share Posted August 20, 2008 CoolSorry if I steered you wrong on the resistors. According to the schematic the 3rd resistor is another 3, not another 7.5. They "probably" don't have to be replaced anyway.Here is a step-by-step rebuild of a KLH Seventeen xo, which is exactly like the 20. My only criticism: It shows using two 4uF caps per speaker. One 8uF is fine, unless you happen to have some 4s on hand.Good luckKenthttp://audiokarma.org/forums/showthread.php?t=102176 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.