Guest frdchang Posted January 11, 2008 Report Share Posted January 11, 2008 Hello,I have a large advent with the rev1 crossover. 16uf and the 8uF combination. Since I don't really need the tweeter switch, i chose to commit my crossover to the rev2 : 16uf 3 ohm .45mH for the tweeter and 1.6mH for the woofer.Any advice regarding inductor selection? Copper Foil? Air core? hand wound? I can't really find exact values for the .45mH inductor. how important is the DCR? (a quick google search reveals that people say 'lower is better' but costs escalate with larger gauge) Link to comment Share on other sites More sharing options...
Pete B Posted January 12, 2008 Report Share Posted January 12, 2008 Hello,I have a large advent with the rev1 crossover. 16uf and the 8uF combination. Since I don't really need the tweeter switch, i chose to commit my crossover to the rev2 : 16uf 3 ohm .45mH for the tweeter and 1.6mH for the woofer.Any advice regarding inductor selection? Copper Foil? Air core? hand wound? I can't really find exact values for the .45mH inductor. how important is the DCR? (a quick google search reveals that people say 'lower is better' but costs escalate with larger gauge)Post #11 here might help: http://www.classicspeakerpages.net/IP.Boar...amp;#entry66570 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.