Guest Nigel Posted June 16, 2001 Report Share Posted June 16, 2001 Re: which terminal is negative: It does not matter as long as you connect both speakers the same way. SO you get to chose.Nigel Link to comment Share on other sites More sharing options...
Guest Posted June 17, 2001 Report Share Posted June 17, 2001 Which terminal is negative 1 or 2?I don't know anything about speakers so this is probably a stupid question. I have the treb and mid knobs cranked is that a good setting for these? Or should I set them in the middle? These speakers look so old but they sound so good. Link to comment Share on other sites More sharing options...
administrator Posted June 17, 2001 Report Share Posted June 17, 2001 Regarding the setting of your pots .. I would leave them at their highest level, as they will still be soft by todays standards. You could also wire the pots out of the circuit and have the drivers full open, which also eliminates the corrosion issue. (I've done this in the past with AR-3's.)Mark Link to comment Share on other sites More sharing options...
Guest Posted June 17, 2001 Report Share Posted June 17, 2001 I guess the instructions on the back of the speaker were right all along. Thanks for the response. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.