Guest Vic Posted February 4, 2007 Report Share Posted February 4, 2007 Just picked up AR3s - tweeter/mid leads broken in several places, including where it enters dome. Any repair for these or time to replace? Link to comment Share on other sites More sharing options...
dynaco_dan Posted February 4, 2007 Report Share Posted February 4, 2007 Hi Vic;The main issue will be the wires closest to the dome.Is it possible for you to take very clear closeup shots of the wire at the dome base entrance?Did you remove the dome screen?I find fine copper solder wick works as a leadin wire. Link to comment Share on other sites More sharing options...
Guest Vic Posted February 4, 2007 Report Share Posted February 4, 2007 Thanks for the quick reply - on one of the mids (with the screen off) the lead is broken off flush with the dome. Can the speaker be disassembled and a new lead soldered on? Link to comment Share on other sites More sharing options...
dynaco_dan Posted February 6, 2007 Report Share Posted February 6, 2007 Hi Vic;Please take a closeup shot for us to evaluate what your options are.After posting a photo, please wait up to a week for all the worldwide experts to see your situation and allow them to comment.A photo is worth 1,000 words, at least. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.