ninohernes Posted March 25, 2006 Report Share Posted March 25, 2006 I have a question regarding my AR-XB turntable. Is there anything that can be done to the cue mechanism to keep it in adjustment? I will set the screw so that it raises and lowers properly, but it will only stay like that for a few cue's, and then it is way too low, to the point where it does not lift the arm and I have to re-adjust it.Any Ideas?? Link to comment Share on other sites More sharing options...
Guest OldRelayer Posted March 26, 2006 Report Share Posted March 26, 2006 I have an XA, no cueing at all, which isn't such a bad thing. This site has an AR TT section, you might want to try a post over there.http://www.vinylengine.com/phpBB2/index.php Link to comment Share on other sites More sharing options...
draftingmonkey Posted March 27, 2006 Report Share Posted March 27, 2006 Joe,If all else fails go over to the turntable factory and ask Joel. He was a help to me in the past on questions about my XA. A real nice and knowledgable fella.http://www.theturntablefactory.com/James Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.