Jump to content

Alternative tweeter for Ar3a or Ar3a Improved

Recommended Posts

Per chi vuole provare alternative al tweeter Ar3a o Improved, con uno Scanspeak D2010 o uno Scanspeak D2008. Suono spettacolare, il tweeter deve essere assolutamente invertito di fase rispetto a mid e woofer, va eliminato il potenziometro di livello, la R piu 'adatta per un buon bilanciamento secondo me e' la 4.7 ohm, ma per chi vuole di più luminosità dei 3.3 ohm, e per chi ha ambienti poco assorbenti la R 5.6 ohm. È una necessaria flangia adattatore tra il foro del cabinet, che ha un diametro maggiore del tweeter, per mantenere il tweeter a filo con il pannello anteriore dell'altoparlante, e un condensatore in polipropilene da 1,5 uF (non costoso), ad esempio , un Jantzen o Audyn Cap




Link to post
Share on other sites

(Auto translation)

For those who want to try alternatives to the Ar3a or Improved tweeter, with a Scanspeak D2010 or a Scanspeak D2008. Spectacular sound, the tweeter must be absolutely inverted phase with respect to the mid and woofer, the level potentiometer must be eliminated, the R most suitable for a good balance in my opinion is the 4.7 ohm, but for those who want more brightness than 3.3 ohm, and for those with poorly absorbing environments the R 5.6 ohm. It is a necessary adapter flange between the hole in the cabinet, which has a larger diameter than the tweeter, to keep the tweeter flush with the front panel of the speaker, and a 1.5uF polypropylene capacitor (inexpensive), for example , a Jantzen or Audyn Cap

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...