Jump to content
The Classic Speaker Pages Discussion Forums
Sign in to follow this  
Chris

Other surround options for NLAs?

Recommended Posts

Hi,

Any other options for NLA surrounds other than the ubiquitous foam ones?

I got my pair of NLAs back in 2007. Original surrounds were toast by then. Installed a pair and they lasted maybe a dozen years.

Here we are again with cracked/rotted surrounds... I don't know how many refoams my cones can take. It's difficult cleaning off the old surround and glue residue with each refoaming. I figure in my life at the current rate I have at least 3 more refoams left.¬†ūüėĀ

I know rubber or cloth would likely change the characteristics of the speaker but I don't think it would significantly... I'd be willing to try.

Midwest Speaker sells rubber ones but the inner lip is angled and would be difficult to install as the cone lip is flat.

Where could I purchase rubber or cloth surrounds with flat inner lips? Or are all of you NLA owners running the same foam surrounds?

Cheers!

Share this post


Link to post
Share on other sites

I own both OLA's and NLA's and have never heard of anything other than foam surrounds for either set of speakers. Both sets of surrounds in my speakers have been replaced. Frankly, I'm surprised you only got around 12 years out of a set of foam surrounds. I would think 20 years or more is closer to the norm. At least that what I got out of foam surrounds for other speakers that I've owned. Perhaps humidity and temperature may affect the service life of a set of surrounds. Personally, I don't think I would try to replace foam with another material. If the speakers were originally designed with foam surrounds you may significantly degrade the sound by going to another surround material. Besides, if rubber or cloth performed as well as foam on Advents, I imagine we would be inundated with both advertisements from vendors and claims by enthusiasts on how well they worked, both on this forum and others.

IMHO, stick with the original foam.

Share this post


Link to post
Share on other sites

Where did you get your first set of replacement surrounds?  A known vendor like Rick Cobb, Simply Speakers, Midwest Speaker, etc. or an ebay seller sourcing surrounds from China?   (Rick Cobb is on ebay but has a good reputation for selling quality surrounds and has a pretty  very loyal following.)

Note: there are two types of polyurethanes used for most foam surrounds: polyester and polyether.  Polyester is stronger against physical damage while polyether is more resistant to UV and humidity.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...