jamval Posted February 22, 2019 Report Share Posted February 22, 2019 I'm new here and an AK member suggested I ask for help here. But I'm not sure which forum to post to. I have a set of Bozak DMS 2500 2 way speakers. They have B-800Bc woofers and what I believe are Audax soft dome tweeters. The tweeters don't work, no continuity, test open. I want to replace just the voice coil/diaphragm and am looking for advice on how to make sure the voice coil is centered in the gap around the pole piece before gluing them. Is this the correct forum to be asking about this? If so I will post some photos and details of what I am attempting to do. Link to comment Share on other sites More sharing options...
Aadams Posted February 22, 2019 Report Share Posted February 22, 2019 20 minutes ago, jamval said: Is this the correct forum to be asking about this? If so I will post some photos and details of what I am attempting to do. There is a Bozak forum just below the Bose forum if you would like to use it. You may get help here but for archival purposes it more properly belongs in the Bozak forum. Link to comment Share on other sites More sharing options...
jamval Posted February 22, 2019 Author Report Share Posted February 22, 2019 OK, I will give it a shot. I thought about posting there, but since the tweeters aren't 'Bozak' I wasn't sure. And these DMS2500 are later model Bozak, post Rudy, and aren't considered 'classic' Bozaks. Thanks for the reply. Link to comment Share on other sites More sharing options...
jamval Posted February 23, 2019 Author Report Share Posted February 23, 2019 I'm not getting any response on the Bozak forum. It's really a question about an Audax tweeter, not made by Bozak. Hope it's not against the rules to post the details in this forum. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.