DavidR Posted July 26, 2018 Report Share Posted July 26, 2018 I have an excess of caps and want to reduce my stash. Caps marked 'used' have less than 10 hours of use but are in good condition. The 2uF mylar by TRW and the Pilkor only have 1/2" leads. Shipping to Lower 48 States via cheapest method - price to be determined. PayPal is preferred. All caps measured at 1kHz on an Agilent U1733C spreadsheet updated 3-23-2019 Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 5, 2018 Report Share Posted August 5, 2018 Do Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 5, 2018 Report Share Posted August 5, 2018 Keyboard batteries went out mid post. I need two replacements for KLH Model 23. Hope the pic is sufficient. What type are these and do you have them? Quote Link to comment Share on other sites More sharing options...
JKent Posted August 5, 2018 Report Share Posted August 5, 2018 TSJ, You need one 4uF cap per speaker. Any of the ones David listed (Erse PEx or Dayton PMPC) would be good, if he still has them. If not, you can get caps from Madisound or PartsExpress. Get two 4uF film caps. Voltage does not matter (they will all be over 50v). You could also use 3.9uF caps. I like the Carli caps sold by Madisound: https://www.madisoundspeakerstore.com/carli-capacitors/carli-mylar-3.9-mfd/ Solens are also good but cost more https://www.madisoundspeakerstore.com/solen-capacitors/solen-4-mfd-fast-cap-400v/ Here are the Daytons https://www.parts-express.com/dayton-audio-pmpc-40-40uf-250v-precision-audio-capacitor--027-226 -Kent Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 5, 2018 Report Share Posted August 5, 2018 Thanks JKent. I'll pick some up some time this week. Quote Link to comment Share on other sites More sharing options...
DavidR Posted August 7, 2018 Author Report Share Posted August 7, 2018 @TSJ All are still available. Just look at the list and send me a PM if you want any. 4uF size cap as Kent pointed out. Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 10, 2018 Report Share Posted August 10, 2018 Which would you recommend? I'm not fluent in the cap lingo. Quote Link to comment Share on other sites More sharing options...
JKent Posted August 10, 2018 Report Share Posted August 10, 2018 On 8/5/2018 at 4:00 PM, JKent said: Any of the ones David listed (Erse PEx or Dayton PMPC) would be good, Myself, I'd go with the Daytons but either the Dayton or the Erse caps will work fine. Quote Link to comment Share on other sites More sharing options...
DavidR Posted August 10, 2018 Author Report Share Posted August 10, 2018 12 hours ago, TSJ said: Which would you recommend? I'm not fluent in the cap lingo. The 1% Dayton Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 13, 2018 Report Share Posted August 13, 2018 I would like to re-cap my 23's and 17's could you send me an invoice for 4 pieces? (2 for the model 23's and two for the model 17's) Do you happen to have the resistors for these models? Quote Link to comment Share on other sites More sharing options...
JKent Posted August 13, 2018 Report Share Posted August 13, 2018 15 minutes ago, TSJ said: Do you happen to have the resistors for these models? Resistors do not normally go bad and therefor would not need to be replaced. OTOH, many KLH speakers used 5w resistors and for about a buck apiece replacing them is cheap insurance. Looks like that's what you did with your 23s. The 17 crossover has (each speaker): Two 2uF caps One 8uF cap Two 3 Ohm resistors One 7.5 Ohm resistor -Kent Quote Link to comment Share on other sites More sharing options...
DavidR Posted August 14, 2018 Author Report Share Posted August 14, 2018 I don't have any resistors for sale. So you need: (2) 4uF for one speaker and (2) 8uF + (4) 2uF for the other speaker Is that correct? Quote Link to comment Share on other sites More sharing options...
lakecat Posted August 15, 2018 Report Share Posted August 15, 2018 Dave...will take one each or three 6uf and one of 25 and 24uf. Private message me with price and shipping to 44319...and can PayPal you. Give me your addy for PP also. Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 16, 2018 Report Share Posted August 16, 2018 On 8/14/2018 at 6:28 AM, DavidR said: I don't have any resistors for sale. So you need: (2) 4uF for one speaker and (2) 8uF + (4) 2uF for the other speaker Is that correct? Sorry, but I'm new to all this and relying on you for the specs. I trust you to ship the Dayton caps for one pair of model-23's and one pair of Model-17's. If you send a PayPal invoice to tommyjay805@yahoo.com, I'll take it from there. If not I understand. Thanks! Quote Link to comment Share on other sites More sharing options...
DavidR Posted August 18, 2018 Author Report Share Posted August 18, 2018 On 8/16/2018 at 11:48 AM, TSJ said: I trust you to ship the Dayton caps for one pair of model-23's and one pair of Model-17's. @TSJ I have (2) 4uF Dayton for the 23 I do NOT have 8uF for the 17. But I could use the Erse mylar 4uF and parallel/solder two together for you x 2. This would match the 2uF mylar caps. I will also solder on longer leads to the 2uF free of charge. Let me know if this is OK as I'm going to the Post Office tomorrow to have boxes weighed to get a shipping cost. I'll need your zip code thanks Quote Link to comment Share on other sites More sharing options...
TSJ Posted August 19, 2018 Report Share Posted August 19, 2018 Thanks for getting back. Zip is 91320. I think I have the 17's sold. So just the 2-Dayton 4uF for the model 23. Can you send pics prior to shipping? Quote Link to comment Share on other sites More sharing options...
DavidR Posted August 19, 2018 Author Report Share Posted August 19, 2018 1 hour ago, TSJ said: Can you send pics prior to shipping? Quote Link to comment Share on other sites More sharing options...
Hornblower Posted August 24, 2018 Report Share Posted August 24, 2018 Quote Shipping to Lower 48 States via cheapest method - price to be determined. PayPal is preferred and I do provide an invoice. If you have your own agile shipping team, please let me know. I also have some music instruments for sale like a bunch of compressor pedals and other guitar equipment. First thanks for sharing this. I'm a little bit of a caveman when it comes to buying stuff online, is Paypal safe? Like do they provide an invoice and everything. Even on eBay I've used cheques and manual receipts but I'm ready to step out of my comfort zone - Almost 37 here so please be kind - Thx!. Quote Link to comment Share on other sites More sharing options...
JKent Posted August 24, 2018 Report Share Posted August 24, 2018 I've used PayPal for 15 years for both domestic and international purchases and sales. 100% safe in my experience. What does "almost 37" mean? If that's your age you're a mere child compared to me (and others here) but I thought the interweb was second nature for your generation -Kent Quote Link to comment Share on other sites More sharing options...
DavidR Posted August 24, 2018 Author Report Share Posted August 24, 2018 17 minutes ago, Hornblower said: First thanks for sharing this. I'm a little bit of a caveman when it comes to buying stuff online, is Paypal safe? Like do they provide an invoice and everything. Even on eBay I've used cheques and manual receipts but I'm ready to step out of my comfort zone - Almost 37 here so please be kind - Thx!. I'm way older than 37 and there was no such thing as a PC when I was in college. I use PayPal for all eBay purchases and many other purchases like Parts Express. Never had a problem. I do NOT link my bank to my credit card and you don't have to but they would like you to. My purchases go direct to my credit card company and any money I make on sales gets used first when buying. An invoice can be created by the seller and sent to the buyer or you can just put money in the buyers acct with a message as to what its for. A tracking number needs to be put in by the seller for the package. Quote Link to comment Share on other sites More sharing options...
Hornblower Posted August 24, 2018 Report Share Posted August 24, 2018 @kent, @david - Thanks for the info guys. Sorry the horror stories just put me off for a while. Good to know that I'm not as old as my kid is making me think these days - Cheers! Quote Link to comment Share on other sites More sharing options...
DavidR Posted March 23, 2019 Author Report Share Posted March 23, 2019 Updated list of what I have left. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.