DavidR Posted August 5, 2018 Report Share Posted August 5, 2018 Kester solder is sold on Parts Express HERE you could also use crimps or crimp type wire nuts. Link to comment Share on other sites More sharing options...
genek Posted August 5, 2018 Report Share Posted August 5, 2018 When I did my 3a pots I soldered 12" wire tails to each pot terminal (and I matched the insulation colors of the pigtails to those of the original wires because I get easily confused about things like color coding). Once I had the pots reinstalled in the cabinets, I decided how much of the pigtail lengths I really needed to be able to comfortably solder them to the original wires, then trimmed and stripped them. It was easy enough to bundle up the excess wire lengths and wire tie the bundles to the crossover wiring after everything was done, and if I ever have to do it again, I can disconnect the pots more easily as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.