Jump to content

Carl

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by Carl

  1. I did some close investigation with my ohmmeter and discovered that voice coils in both tweeters were good. It turned out that on each speaker one of the fine wires that run from the connection lugs to the coil was broken just were the wire runs from the frame to the edge of the speaker cone. I was able to lift it from the cone and remove it from the frame and loop the ends together then apply some solder. Taped the wire in place to the frame. All is good and working fine. The wires are very fine so I had to use watchmakers tweezers to work on them. Thanks Giorgio for your advice, you got me going in the right direction.
  2. On a related topic, the tweeters on my AR6 are blown. Anyone know a good modern replacement. My AR6 has the 10uf cap and resistor.
×
×
  • Create New...