Gr3grs

So I sanded the cabinet and applied mineral spirits. I was having a very difficult time removing the stain. I only got a very small amount off. I did some additional sanding and then applied danish oil. It’s not exactly where I would have liked it to be, but I suppose it is a bit better than it was before. Thank you guys for your help so far.

Thank you. In hindsight I should have just used Danish oil or something similar from the start. I did remove a significant amount of filler. I just want the area that was repaired to match the rest of the cabinet. Do you have a chemical you’d recommend for stain removal?

Minwax english chestnut

Hello! I was hoping someone could help me out here. I was was trying to remove excess wood filler around the nose of my AR3a’s from the previous owner. I successfully sanded the filler down and applied stain which appeared to be a good match (bad idea). Now the area that I “spot repaired” is darker than the rest of my speaker cabinet. Anyone have any suggestions on how I can solve this? Any help would be amazing. Thanks.