Fred Johnson
-
Posts
1 -
Joined
-
Last visited
Fred Johnson's Achievements
Newbie (1/14)
0
Reputation
-
Pete:
I am a little confused regarding the figures on your baselaudiolab.com page for the Advent crossovers. The first figure is clearly labeled Figure 1. Rev0 Original Large Advent Crossover. Below that figure on the page is the statement: Large Advent Rev1 Crossover, note the off white and red "button" fine wire tweeter inductors. This statement appears to apply to figure above it in which it shows two buttons, one of which is red and the other appears to be off white, which raises the question, "Is this the Rev0 crossover or the Rev1 crossover in Figure 1?" It appears that the note is mislabeled as a Rev1 crossover because Figure 2 is labeled Rev1 Original Large Advent Crossover, and it clearly does not contain any red or off white buttons.Can you confirm that the note is incorrect below Figure 1?
Fred Johnson (rebuilding 4 original Large Advent crossovers, or at least replacing the capacitors)
-
Pete:
I actually now think that the figure that I thought was Figure 1 is not a Rev0 crossover. It appears that the figure labels are intended to be located BELOW (not above) the figures and that Figure 1 is actually missing. Is that correct? -
I reviewed Pete's postings and agree there is NO fig. 1
Figure 2 shows Rev. #1 and Fig. 3 shows Rev. #2
Just to review, The first iteration which Pete calls Rev. 0 is the 16/8/4 configuration with component values listed in post #10. The second iteration which is the true Rev. #1 is the 16/16/3 configuration. The last being Rev. #2 with is the 16/8/3 configuration
-
